Welcome to our websites!
  • K78 SERIES HEAVY DUTY INDEPENDENT CHUCK

    K78 SERIES HEAVY DUTY INDEPENDENT CHUCK

    Short Description:

    K78 SERIES HEAVY DUTY INDEPENDENT CHUCK   Heavy-duty steel body,for higher rigidity greater rigidity with reinforced nerves,two-piece jaw. It is widely used in large and heavy duty horizontal lathe or vertical lathe SPECIFICATIONS: Model Size Short-taper No. D1 D2 D3 H H1 h h1 h2 d1 z-d kgs Net WT 1000 11 196.869 235.0 180 355 150 20 16 10.0 2...

  • K11 SERIES THREE-JAW SELF-CENTERING CHUCK

    K11 SERIES THREE-JAW SELF-CENTERING CHUCK

    Short Description:

    K11 SERIES THREE-JAW SELF-CENTERING CHUCK  K11 series Three-jaw Self-centering chuck is subdivided into three types,K11,K11A,Type K11 provides two sets of clutches in different directions, which can be used respectively.Type K11A provides,ISO3442 standard clutches.Soft clutches are to be provided on request,higher centering accuracy can be achieved after being rubbed on the machine,so as to sa...

  • High Precision Electro Magnetic Chuck X11P Series

    High Precision Electro Magnetic Chuck X11P Series

    Short Description:

    The main usage and characteristic of the electromagnetic chuck: 1.Best for both large and small workpiece 2.Less Mechanical deformation due to strong integral base 3.Less thermal deformation and power waste due to low current. 4.The lower height of the product make the lighter weight and increase the grinding space. 5.Waterproof structure, magnetic force more than 100N/CM2, less residual magne...

  • Powerful Electro Magnetic Chuck X91 Series

    Powerful Electro Magnetic Chuck X91 Series

    Short Description:

    The main usage and characteristic of the electromagnetic chuck: X91 Heavy-duty Rectangular Electromagnetic Chuck This series of electromagnetic chuck is used for milling machine and planing machine. The features of this series : powerful suction, safe and reliable to use, convenient to fix workpiece that not suitable for mechanical clamping .The type of X91F products can prevent milling and pla...

  • Normal Electro Magnetic Chuck  X11  Series

    Normal Electro Magnetic Chuck X11 Series

    Short Description:

    The main usage and characteristic of the electromagnetic chuck: 1.X11 normal rectangular electromagnetic chuck is a type of magnetic workholding device for surface grinder machine and milling machine. 2.Used for sucking magnetic conductivity workpieces to achive fixed position and processing. 3.The features of this series: suction force well-distributed, positioning reliable, easy to operate. 4...

  • Fine Pitch Electro Magnetic Chuck X11M Series

    Fine Pitch Electro Magnetic Chuck X11M Series

    Short Description:

    The Description of goods The main usage and characteristic of the electromagnetic chuck: Fine pitch electro magnetic chuck is a type of magnetic workholding device. Can be used for surface grinder machine, tool grinding machine and electromachine etc. Able to suck magnetic conductivity materials, the suction force is well-distributed and with high processing accuracy. It’s suitable for proces...

  • Pneumatic Vacuum Chuck HT series

    Pneumatic Vacuum Chuck HT series

    Short Description:

    1. WITHOUT PUMP: A. this product adopts vacuum ejector, only through compressor can work. B. even machine had inhaled cooling oil. cooling water or rubbish etc. Vacuum Chuck also can exclude them. 2. FOR AVAILABLE ALL PROCESS PRODUCTS: A. work well for up layer process, grinding. B. assist metal using, special shape produets process also easy to drill work. 3. AT WILL TO ADJUST SIZE: A. accordi...

  • Permanent Magnetic Chuck X41 series

    Permanent Magnetic Chuck X41 series

    Short Description:

    The main usage and characteristic of the electromagnetic chuck: 1.Applies to surface grinder, EDM machine and linear cutting machine. 2.Pole space is fine, Magnetic force is distributed uniformly. It performs well on thin and tiny workpiece machining. The working table precision doesn’t change during magnetizing or demagnetizing. 3.The panel through special processing,with no leakage, prevents...

  • Universal Dividing Head F11100A F11125A

    Universal Dividing Head F11100A F11125A

    Short Description:

    F11 SERIES UNIVERSAL DIVIDING HEAD This series is one of the most important attachment for milling machine. with the help of this dividing head the workpiece held between centers, or on a chuck can be rotate to any angle as desired and the periphery of a workpiece can be divided into any divisions of equal parts. By means of all kinds of cutters, the dividing head can also help milling machine ...

  • Dividing Head BS-2

    Dividing Head BS-2

    Short Description:

    BS SERIES SEMI-UNIVERSAL DIVIDING HEAD BS-2   The universal index center has been designed to carry out all types of gear cutting. Precision dividing and spiral word with greater precision and efficiency than ever the center face can be tilted from a horizontal position of 90 degree down to -10 degree from vertical, and inclinations can be read off ascale graduated in degrees.The center is...

  • Rotary Table TSL100 TSL150 TSL160

    Rotary Table TSL100 TSL150 TSL160

    Short Description:

    TSL SERIES ROTARY TABLE FEATURES: 1.TSL vertical & horizontal rotary table is one of the main accessory of milling machine, it is used for index boring, 2.milling, circle cutting, spot facing and boring hole etc on milling machine. 2.Rotary table in vertical with tailstock working together, it can used on complex work for circle index boring and milling.   3.As SPECIFICATIONS: MODE...

  • Rotary Table HV-3”HV-4″ HV-5″

    Rotary Table HV-3”HV-4″ HV-5″

    Short Description:

    MINI SERIES ROTARY TABLE FEATURES: Mini H/V rotary is one of main accessories of DIY and home use milling machines it is used for index boring, milling, circle cutting, spot facing and boring hole etc on milling machine. Rotary table in vertical with tailstock working together, it can used on complex work for circle index boring and milling. SPECIFICATIONS: MODEL HV-3” HV-4” HV-5” ...

  • Rotary Table TSA SERIES

    Rotary Table TSA SERIES

    Short Description:

    TSA SERIES ROTARY TABLE FEATURES: 1.TSA series rotary table is one of the most important accessory of milling machine. 2.It is widely used for index boring, milling, circle cutting, circle curve plane and segment etc operation. 3.As a option, different table supply different flange, flange will be packed separately. Otherwise, dividing plates which provides from the option can indexing all of t...

  • 58 PCS Clamping Kit Sets

    58 PCS Clamping Kit Sets

    Short Description:

    58 PCS Clamping Kit Heat treated steel black oxide finish Hardness:studs 25°,nut and step clamp step block 35-38° Apply for fixing each kind of working piece on machine table High Precision Each sets contains: 6 T-slot nuts 6 flange nuts. 4 coupling nuts. 6 pair step blocks 6 serrated end clamps 24 studs, 4 each of 3″, 4″, 5″, 6″, 7″, 8″ 1 Delux holder M...

  • Machine Cabinets GBC-206-1

    Machine Cabinets GBC-206-1

    Short Description:

    HOTON MACHINERY FIVE DRAWER BOARD TYPE TOOL CART GBC-206-1 Tool cart capacity is 300ksg With 4 sizes 2 swivel polyurethane wheels and brakes and 2 fixed polyurethane wheels The drawer and with cam lock which is from shanghai famous brand. Safety central locking and the self-locking system are provided The drawer and the box body all use 1.0mm cold steel plate Drawers with 2mm thickness slide ra...

  • Machine Cabinets SCC-201

    Machine Cabinets SCC-201

    Short Description:

    HOTON MACHINERY THREE-TYPE TOOL CART With 4 size 2 swivel polyurethane wheels and brakes and 2 fixed polyurethane wheels The door and drawer are all cam lock which is famous brand form Shanghai Thickness 2mm of three slides guide on drawer THE PARAMETERS OF GOODS MODEL SCC-201 NET SIZE W700XD300XH660MM MATERIAL THICKNESS 1.0mm PACKAGE SIZE W710XD360XH260MM NET WEIGHT...

  • Machine Cabinets SCC-201-1

    Machine Cabinets SCC-201-1

    Short Description:

    HOTON MACHINERY THREE-TYPE TOOL CART   With 4 size 2 swivel polyurethane wheels and brakes and 2 fixed polyurethane wheels The door and drawer are all cam lock which is famous brand form Shanghai Thickness 2mm of three slides guide on drawer THE PARAMETERS OF GOODS MODEL SCC-201-1 NET SIZE W700XD350XH660MM MATERIAL THICKNESS 1.0-2.0mm PACKAGE SIZE W710XD365XH360MM ...

  • Machine Cabinets ZHC-101-3E

    Machine Cabinets ZHC-101-3E

    Short Description:

    HOTON MACHINERY CNC COMBINATION TOOL CART ZHC-101-3E High quality CNC combination tool cart with tool holder The form a complete set of products in numerical control processing center, to store the handle or tool rod can effectively extend the service life of cutting tools, to ensure that product quality has a great help. 1.The stabile structure and special surface’s process ensure the ...

  • Machine Cabinets ZHC-301-2

    Machine Cabinets ZHC-301-2

    Short Description:

    HOTON MACHINERY COMBINING TYPE TOOL CART ZHC-301-2 1.Holes for tool holder 2.Model ZHC-301-2 3. PACKING SIZE:W810xD500xH920 4.BT30 with 48pcs  ; BT40 with 48pcs ;BT50 with 40pcs 5.Could avoid any collision among tool holders,then keep precision and stable the quality. PARAMETERS OF PRODUCSTS MODEL ZHC-301/2 NET SIZE W810xD500xH920 MATERIAL THICKNESS 1.0mm PACKAGE SIZE W9...

  • Parallel Block PB156

    Parallel Block PB156

    Short Description:

    Features: 1.Hardness:HRC55~62 2.Accuracy:0.01mm 3.Parallelism:0.005mm Model PB156 PRECISION PARALLEL BLOCK PCS L*W*H PB156-1 120x8x2(17,22,25,28,32,36,38) 8×2 PB156-2 160x8x12(17,22,25,28,32,36,38) 8×2 PB156-3 200x8x17(22,26,28,32,36,38,42) 8×2

123 Next > >> Page 1 / 3
WhatsApp Online Chat !