Factory wholesale Gap Bed Lathe Machine - Dividing Head-BS-2 – Hoton
Factory wholesale Gap Bed Lathe Machine - Dividing Head-BS-2 – Hoton Detail:
The universal index center has been designed to carry out all types of gear cutting. Precision dividing and spiral word with greater precision and efficiency than ever the center face can be tilted from a horizontal position of 90 degree down to -10 degree from vertical, and inclinations can be read off ascale graduated in degrees.The center is built to highest engineering standards and is factory inspeted and tested to assure complete satisfaction.The ratio of worm to gear is 1:40
TAIL-STOCK Unit:mm/in
|
Model |
A1 |
B1 |
H1 |
h |
a1 |
b1 |
g1 |
N.W.(kg) |
Measurement |
|
BS-2 |
183 |
87 |
156 |
133 |
175 |
122 |
16 |
Packed with the Dividing Head |
|
|
7.2 |
3.42 |
6.14 |
5.24 |
6.89 |
4.8 |
0.63 |
|||
HEAD-STOCK Unit:mm/in
|
Model |
A |
B |
H |
h |
a |
b |
g |
Work hole taper |
N.W. |
|
BS-2 |
370 |
280 |
236 |
133 |
212 |
134 |
16 |
MT4 |
73 |
|
14.57 |
11.02 |
9.29 |
5.24 |
8.35 |
5.28 |
0.63 |
B&SNO.10 |
STANDARD ACCESSORIES
Dividing plate A,B,C
Number of holes of dividing plate(worm gear reduction radio 1:40)
Unit:mm
|
Number of hole
|
PlateA |
15 |
16 |
17 |
18 |
19 |
20 |
|
PlateB |
21 |
23 |
27 |
29 |
31 |
33 |
|
|
Platec |
37 |
39 |
41 |
43 |
47 |
49 |
BS-2 Series Universal Dividing Head
Description:
1. Dividing Head can divide in any angle by the direct, in-direct, or different methods. The ratio between the warm and the warm gear is 40: 1.
2. Hardened and ground spindle is rigidly held in a taper roller bearing. Worm is hardened and ground also.
3. The swivel head can be locked of any angle from 10degree below horizontal to 90degree vertical-precision fitting to base assures smooth rotation.
4. All models have threaded spindle nose and 24 hole dividing plate with easy conversion to fast direct indexing on numbers 2, 3, 4, 6, 8, 12, and 24.
5. Easy indexing of al numbers from 2 to 50 and many numbers from 52 of 380. Model BS-2 is also equipped for different indexing for all numbers from 2 to 380, and for spiral cutting.
6. Accurate precision, little backlash, fine appearance and strong structure so can assure smooth rotation.
Head Stock Unit:mm/in
|
Model |
A |
B |
H |
h |
a |
b |
g |
Work hole taper |
N.W. |
|
BS-2 |
370 |
280 |
236 |
133 |
212 |
134 |
16 |
MT4 |
73 |
|
14.57 |
11.02 |
9.29 |
5.24 |
8.35 |
5.28 |
0.63 |
B&SNO.10 |
Tail-stock Unit:mm/in
|
Model |
A1 |
B1 |
H1 |
h |
a1 |
b1 |
g1 |
N.W.(kg) |
Measurement |
|
BS-2
|
183 |
87 |
156 |
133 |
175 |
122 |
16 |
Packed with the Dividing Head |
|
|
7.2 |
3.42 |
6.14 |
5.24 |
6.89 |
4.8 |
0.63 |
|||
STANDARD ACCESSORIES
Dividing plate A,B,C
Number of holes of dividing plate(worm gear reduction radio 1:40)
Unit:mm
|
Number of hole |
Plate A |
15 |
16 |
17 |
18 |
19 |
20 |
|
Plate B |
21 |
23 |
27 |
29 |
31 |
33 |
|
|
Plate C |
37 |
39 |
41 |
43 |
47 |
49 |
Product detail pictures:
Related Product Guide:
Saracen’s new Levarg gravel bike range looks like a lot of fun for your money | Shearing Machine
Cooperation
We are experienced manufacturer. Wining the majority of the crucial certifications of its market for Factory wholesale Gap Bed Lathe Machine - Dividing Head-BS-2 – Hoton , The product will supply to all over the world, such as: Sheffield, New Zealand, Thailand, Faced with the vitality of the global wave of economic integration, we are confident with our high-quality products and sincerely service to all our customers and wish we can cooperate with you to create a brilliant future.
By Atalanta from Denver - 2015.10.31 10:02
This is a honest and trustworthy company, technology and equipment are very advanced and the prodduct is very adequate, there is no worry in the suppliment.
By Joseph from New Zealand - 2016.01.28 19:59
